Advanced Performance Setup - Hubsan H501S X4 AIR User Manual

On (switch up) Off (switch down)
[GPS]
[SA]

Advanced Performance Setup

1) Reverse channel setup
If you would like to reverse any of the stick functions, please follow the instructions
below. Be aware that this will reverse the control commands. Pull the throttle stick down
to the lowest position and long press the 'Enter' key to open the 'Main Menu' interface.
Use the Up / Down keys to select 'Set reverse' and use the 'Enter' key to switch between
modes. Long press 'Exit' key to save and exit.
2) Sensitivity Setup
If you would like to adjust the sensitivity of any stick functions, then follow the
instructions below.
Pull the throttle stick down to the lowest position and long press the 'Enter' key to open
the 'Main Menu' interface. Use the Up / Down keys to select 'Set sensitive' and use the
'Enter' key to switch between 'Expert mode' and 'Normal Mode'. Long press 'Exit' key to
save and exit.
GPS switch for GPS Hold mode
When the switch is up, GPS
Hold mode is on. When the
switch is down, GPS Hold mode
is off.
[Home]
Return to Home switch for
[SB]
Return to Home mode When
the switch is up, RTH mode is
on. When the switch is down,
RTH mode is off.
27