Table of Contents
Advertisement
When the aircraft is not connected to a
transmitter or has been disconnected
from a transmitter, the fore LEDs will
flash blue. Upon connection with a
transmitter, the fore LEDs will turn solid.
Takeoff: After arming the motors, release the joysticks. Smoothly
and slowly pull the throttle upwards to take off.
Auto Takeoff / Land / Return To Home
Auto Takeoff
Auto Land
A
Return To Home
Aircraft LED Indications
Zino has 4 LEDs; the fore / frontal LEDs are blue and the rear LEDs
are red. The LED status indications are defined as follows:
Function
Power On And
Start Up
Horizontal
Calibration
LED status indication
All 4 LEDs flash slowly
All 4 LEDs flash slowly
Compass
Calibrate Compass 17 LEDs flash in vertical pain, alternately
Calibration
Calibrate Compass 2 All 4 LEDs flash simultaneously
Flight mode
All 4 LEDs are solidly lit
Low Power
Fore / frontal blue LEDs stay solidly lit and
the mar red LEDs flash rapidly
Headless
Fore / frontal LEDs are solid blue and rear
Mode
red LEDs flash alternately
Return To
Fore LEDs are solid blue and rear LEDs
Home
slow!y flash red
Photo
Rear red LEDs flash once
Video
Rear red LEDs flash alternately
Flight Control
Connection
Status
05
Advertisement
Table of Contents
