PerkinElmer CLARUS 590 GC User Manual page 18

18 . Clarus 590 GC User's Guide
Term
Equilibration
Flameout
Isothermal
method
Method
Negative-time
event
Parameter

PPC
Pre-run
PreVent
Range
Ready
Run
Sleep mode
Temperature
program
Timed Events
Zone
Description
The delay time after the method set points have been
reached before the system becomes READY.
PPC version only. Detects if the flame is on to prevent
injection into a nonfunctioning system and subsequent
loss of sample.
A method in which the oven temperature remains
constant throughout a GC run.
A collection of parameters that control the GC.
A timed event that you set to occur before the
instrument becomes READY.
An independent variable used to specify a condition to
be met.
Programmable Pneumatic Control
The time after equilibration during which negative-time
events are executed.
PPC version only. Sample management system.
Range means amplification of the detector output
signal.
Indicates that all method parameters have reached their
set points and that you can start your analysis.
The time from sample injection to the end of the oven
temperature program.
The GC can be set to a predefined method for gas
savings.
PPC version only. A program that specifies the rate of
oven temperature increase from one plateau to the
next, and the time the oven temperature is held
constant at a plateau.
Events that take place before or during a GC run as
specified in a timed events table.
A heated area in the GC oven, injector, or detector.