Renesas RA Family
MCK-RA6T2 User's Manual
4.6 Hardware Setup
4.6.1 Board Connection
When using this product for motor control evaluation, connect the boards as shown in Figure 4-9. Note that
the connector between the CPU board and the inverter board is a tight fit, so be careful not to bend the pins
when connecting or disconnecting.
Please refer to 4.6.2 for the power supply method. In Figure 4-9, the power is supplied from the AC adapter.
The RA6T2 CPU board supports a maximum of two-motor control and can be connected as shown in Fig.
6.1 shown later, if you prepare an additional inverter board and motor.
Figure 4-9 Board connection
R12UZ0091EJ0100 Rev 1.00
Page 17 of 38
August 3, 2021