Cpu Board Specification; Functions; Power Supply; Onboard Debugger - Renesas RA6 Series User Manual

Hide thumbs Also See for RA6 Series:

Table of Contents

Renesas RA Family

6. CPU Board Specification

This section describes the specification of the CPU Board.

6.1

6.1.1

When not connected to the inverter board, power should be supplied from the USB connector. When

connecting to the inverter board, power supply from the USB connector or from the inverter board will be

automatically selected. USB power supply has priority.

6.1.2

This product has the onboard debugger circuit, J-Link On-Board (hereinafter called "J-Link-OB"). You can

write a program (firmware) of RA6T2 with it. When you write a program, connect the CPU board to PC with

USB cable. J-Link-OB operates as debugger equivalent to J-Link. If connecting from Integrated Development

Environment or flash programing tool (e.g. J-Flash Lite by SEGGER), set the type of debugger (tool) to "J-

Link".

R12UZ0091EJ0100 Rev 1.00

August 3, 2021

MCK-RA6T2 User's Manual

Page 28 of 38

Table of Contents

Mck-ra6t2 Ra6t2