Table of Contents
Advertisement
1 Product description
1.1 Overview
The EVK-NINA-W13 evaluation kit includes an evaluation board, which can be used as a reference design for the
NINA-W13 series Wi-Fi modules, a quick start guide and a USB cable. For the NINA-W131 module, the
evaluation board is prepared with a U.FL coaxial connector for connecting the external antenna. The NINA-W132
module has an onboard antenna; thus the EVK-NINA-W132 evaluation board does not have a U.FL connector.
The main features of the EVK-NINA-W13 are:
•
Available in two variants - NINA-W131 and NINA-W132
•
All of the NINA-W13 module pins are available at connectors or jumpers
•
Can be powered through USB (J8) or external power supply (J23)
•
Equipped with a Quad High Speed USB to Multipurpose UART/MPSSE IC (FT4232) that allows serial
communication and flashing over USB.
The EVK-NINA-W13 evaluation kits are available in the following two variants, depending on which NINA-W13
module is mounted on the EVK:
•
EVK-NINA-W131 – Evaluation kit for NINA-W131 module, RF port available on U.FL connector (J21)
•
EVK-NINA-W132 – Evaluation kit for NINA-W132 module with onboard antenna
This section describes the main connectors and settings that are required to get started. Figure 1 and Figure 2
show the two variants of the EVK-NINA-W13 evaluation board - EVK-NINA-W131 and EVK-NINA-W132.
Figure 1: EVK-NINA-W131 evaluation board
UBX-17011007 - R04
EVK-NINA-W13 - User Guide
Product description
Page 4 of 20
Advertisement
Table of Contents
