C101-D9S - User guide
2 C101-D9S product overview
2.1 Components
C101-D9S houses the NEO-D9S L-band correction data receiver. The board is powered from the USB
cable connection or via Arduino shield. The main components of the board are listed below and shown
in Figure 1 and Figure 2:
• Native USB port
• FTDI USB bridge
• SMA RF connector and antenna supply capability (L-band)
• UART2 interface through Arduino shield
• NEO-D9S RESET button
• NEO-D9S SAFEBOOT button
Figure 1: C101-D9S block diagram
UBX-20031865 - R02
C101-D9S product overview
Page 5 of 16
C1-Public