Ublox EVK-NINA-W13 User Manual

Ublox EVK-NINA-W13 User Manual

Evaluation kit for nina-w13 modules
Hide thumbs Also See for EVK-NINA-W13:

Advertisement

Quick Links

EVK-NINA-W13
Evaluation Kit for NINA-W13 modules
User Guide
Abstract
This document describes how to set up the EVK-NINA-W13x
evaluation
kits
to
evaluate
Wi-Fi modules. It also describes the different options for debugging
and the development capabilities included in the evaluation board.
www.u-blox.com
UBX-17011007 - R04
NINA-W13
series
stand-alone

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EVK-NINA-W13 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ublox EVK-NINA-W13

  • Page 1 EVK-NINA-W13 Evaluation Kit for NINA-W13 modules User Guide Abstract This document describes how to set up the EVK-NINA-W13x evaluation kits evaluate NINA-W13 series stand-alone Wi-Fi modules. It also describes the different options for debugging and the development capabilities included in the evaluation board.
  • Page 2 EVK-NINA-W13 - User Guide Document Information Title EVK-NINA-W13 Subtitle Evaluation Kit for NINA-W13 modules Document type User Guide Document number UBX-17011007 Revision, date 12-Mar-2018 Disclosure restriction This document applies to the following products: Product name Type number Software version PCN reference...
  • Page 3: Table Of Contents

    EVK-NINA-W13 - User Guide Contents Contents ..........................3 Product description ...................... 4 Overview .............................. 4 Kit includes ............................5 Jumper description ..........................6 LEDs ..............................9 Connectors ............................10 Buttons ............................... 10 Configuration options ........................11 Setting up the evaluation board ................12 Evaluation board setup ........................
  • Page 4: Product Description

    1 Product description 1.1 Overview The EVK-NINA-W13 evaluation kit includes an evaluation board, which can be used as a reference design for the NINA-W13 series Wi-Fi modules, a quick start guide and a USB cable. For the NINA-W131 module, the evaluation board is prepared with a U.FL coaxial connector for connecting the external antenna.
  • Page 5: Kit Includes

    EVK-NINA-W13 - User Guide Figure 2: EVK-NINA-W132 evaluation board Take care while handling the EVK-NINA-W132. Applying force to the NINA-W132 module might damage the internal antenna. 1.2 Kit includes 1.2.1 EVK-NINA-W131 The EVK-NINA-W131 evaluation kit includes the following: • EVK-NINA-W131 evaluation board •...
  • Page 6: Jumper Description

    Table 1: EVK-NINA-W13 jumper descriptions J15 (pin-1) J14 (pin-1) J26 (pin-1) J16 (pin-1) J17 (pin-1) J25 (pin-1) J18 (pin-1) J7 (pin-1) J5 (pin-1) J6 (pin-1) Figure 3: Jumper positions on the EVK-NINA-W13 UBX-17011007 - R04 Product description Page 6 of 20...
  • Page 7 EVK-NINA-W13 - User Guide Middle row jumper pin Connected to J14-1 Module pin-28 J14-3 Module pin-29 J14-5 Module pin-1 J14-7 Module pin-21 J14-9 Module pin-20 J14-11 Module pin-16 J14-13 Module pin-17 J14-15 Module pin-18 J16-1 Module pin-8 J16-3 Module pin-27...
  • Page 8 EVK-NINA-W13 - User Guide 1.3.1 Default jumper configuration Mod pin-21 to J18-3 Mod pin-20 to IO22 (RTS) Mod pin-16 to IO25 (DTR) Mod pin-28 to IO5 Mod pin-17 to IO26 (DSR) Mod pin-29 to IO18 3.3V to Mod pin-9 Mod pin-18 to IO27 3.3V to Mod pin-10...
  • Page 9: Leds

    Amber status RGB LED to present module satus [ 1 ] Table 5: EVK-NINA-W13 LEDs description [1] To control the LEDs, the corresponding signal jumper(s) must be populated. Figure 6: Position of LEDs on EVK-NINA-W132 and EVK-NINA-W131 UBX-17011007 - R04...
  • Page 10: Connectors

    2.1 mm Power jack, positive center pin, 5 – 12 V Table 6: EVK-NINA-W13 connector descriptions 1.6 Buttons The EVK-NINA-W13 evaluation board has four buttons as explained in Table 7. Two of them can be connected to NINA-W1 pins via jumper configuration. Button...
  • Page 11: Configuration Options

    (2) These IO signals require a second jumper to be positioned at the IO distribution jumper J18 as mentioned in Table 4. 1.7.1 Power supply The supply voltage to the EVK-NINA-W13 evaluation board can be sourced from the following connectors: • USB (J8) Depending on your USB source, the USB supply current may be insufficient.
  • Page 12: Setting Up The Evaluation Board

    2.4 GHz antenna with the U.FL antenna connector (J21). Failing to do so may cause undesired operation. The EVK-NINA-W132 has an onboard antenna. Be careful to check polarity before connecting external power supply to the EVK-NINA-W13 evaluation board. Center conductor is positive (+) and the ring is negative (-).
  • Page 13: Appendix

    EVK-NINA-W13 - User Guide Appendix A Layouts Figure 8: Primary and secondary side layouts of EVK-NINA-W13 UBX-17011007 - R04 Appendix Page 13 of 20...
  • Page 14: B Schematic Drawings

    EVK-NINA-W13 - User Guide B Schematic drawings UBX-17011007 - R04 Appendix Page 14 of 20...
  • Page 15 EVK-NINA-W13 - User Guide UBX-17011007 - R04 Appendix Page 15 of 20...
  • Page 16 EVK-NINA-W13 - User Guide UBX-17011007 - R04 Appendix Page 16 of 20...
  • Page 17 EVK-NINA-W13 - User Guide UBX-17011007 - R04 Appendix Page 17 of 20...
  • Page 18: C Glossary

    EVK-NINA-W13 - User Guide C Glossary Name Definition Communication Clear To Send Data Set Ready Data Terminal Ready Evaluation Kit Ground General Purpose Input GPIO General Purpose Input/Output Input-Output Light-Emitting Diode Physical layer U.FL Miniature coaxial RF connector Universal Serial Bus...
  • Page 19: Related Documents And Links

    Updated Figure 8 and schematic drawing (Appendix B). Updated assigned COM ports in section 2.1. 09-Nov-2017 kgom Renamed this document as EVK-NINA-W13 User Guide and updated the content due to the availability of a separate user guide for the EVK-NINA-W10x evaluation kits (UBX-17057549). 12-Mar-2018 cmag Updated the software version to 1.0.0 in the last table on page 2 and the “Related...
  • Page 20: Contact

    EVK-NINA-W13 - User Guide Contact For complete contact information visit us at www.u-blox.com. u-blox Offices North, Central and South America Headquarters Asia, Australia, Pacific Europe, Middle East, Africa u-blox America, Inc. u-blox Singapore Pte. Ltd. u-blox AG Phone: +1 703 483 3180...
  • Page 21 X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for category: Data Conversion IC Development Tools Click to view products by manufacturer: U-Blox Other Similar products are found below : EV-AD5443/46/53SDZ EVAL-AD5063EBZ EVAL-AD5064EBZ EVAL-AD5361EBZ EVAL-AD5363EBZ EVAL-AD5373EBZ EVAL- AD5422LFEBZ EVAL-AD5629RSDZ EVAL-AD5755-1SDZ EVAL-AD5821AEBZ EVAL-AD7175-8SDZ EVAL-AD7262EDZ EVAL- AD7265EDZ EVAL-AD7366SDZ EVAL-AD7634EDZ EVAL-AD7641EDZ EVAL-AD7655EDZ EVAL-AD7674EDZ EVAL-AD7705EBZ EVAL-AD7718EBZ EVAL-AD7719EBZ EVAL-AD7730LEBZ EVAL-AD774142EBZ EVAL-AD7767-1EDZ EVAL-AD7873EBZ...

Table of Contents