Reading With Averaging - HunterLab SpectraTrend HT User Manual

• Press READ (GO button) to take another reading in this product setup. Press NEXT
(UP ARROW) if it is an option to move to the next data view for this product setup.
Press MAIN MENU (RIGHT ARROW) to return to the MAIN MENU.

Reading With Averaging

Complete the following steps to take and average multiple readings using the SpectraTrend HT:
Note: These instructions apply when Average in the product setup is set to a
• Select READ from the SpectraTrend HT's main menu. Move the cursor highlight to its
position using the UP and DOWN ARROW buttons and then press the GO button.
• The first Reading screen appears, asking if you want to select the setup to use. If you
want to read using the last product setup that was used, press NO (DOWN ARROW)
and skip to Step 4. If you want to select the setup for use from the list of setups,
press YES (UP ARROW), and the SELECT SETUP TO USE screen appears.
• Scroll through the list of setups using the UP and DOWN ARROW buttons until the
setup you wish to use is highlighted, then press the center button GO to move to
that setup.
• The first reading screen appears, which prompts you to place the standard for
reading 1 of n (if the product setup uses a working standard) or sample for reading 1
of n.
SpectraTrend HT User's Guide 3.2
value other than OFF.
Figure 85. Selecting a New Setup for Averaging
71