Table Of Contents - Genius MILORD5 Manual

1. DESCRIPTION AND TECHNICAL SPECIFICATIONS
2. ELECTRICAL SET-UP
3. INSTALLING THE AUTOMATED SYSTEM
3.1. PRELIMINARY CHECKS
3.2. INSTALLING THE OPERATOR
3.3. INSTALLING THE RACK
3.4. POSITIONING THE STROKE-LIMIT MAGNETS
4. START-UP
5. AUTOMATED SYSTEM TEST
6. MANUAL MODE OPERATION
7. SPECIAL APPLICATIONS
8. MAINTENANCE
9. REPAIRS
Manufacturer: GENIUS S.p.A.
Address: Via Padre Elzi, 32 - 24050 - Grassobbio BERGAMO - ITALY
Declares that: Operator mod. MILORD 5 - MILORD 8 - MILORD 424
• is built to be incorporate in a machine or to be assembled with other machinery to create a machine under the provisions of
Directive 98/37/EC;
• conforms to the essential safety requirements of the other following EEC directives:
73/23/EEC and subsequent amendment 93/68/EEC.
89/336/EEC and subsequent amendment 92/31/EEC and 93/68/EEC
Furthermore, the manufacturer declares that the machinery must not be put into service until the machine into which it will be
incorporated or of which it will become a part has been identified and its conformity to the conditions of Directive 98/37/EC has
been declared.
Grassobbio, 01-06-2006
CE DECLARATION OF CONFORMITY FOR MACHINES
(DIRECTIVE 98/37/EEC)
INDEX
The Managing Director
D.Gianantoni
6
pag.7
pag.7
pag.7
pag.7
pag.7
pag.8
pag.9
pag.10
pag.10
pag.10
pag.10
pag.10
pag.10