Setup Command Error E D 01 - ALLIANCE SCL020WT Original Instructions Manual

Troubleshooting

Setup Command Error E d 01

NOTE: The machine configuration is set at power up. If a change has been made, the machine must be powered
down and up again.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
Power down, power up
and try again. Is the
No
correct inverter
installed in the
machine?
Yes
Power machine down.
Yes
Are there any loose
connections?
No
Check the L7S check
dipswitchs are set
for the correct
capacity.
122
Verify the correct
size and voltage
inverter is installed.
Repair connections
and power machine
back on.
Part No. F8677701EN