APRILIA RSV4 RR 2017 Service Station Manual page 409

RSV4 RR-RF
•
Install the following components on the
wheel holder stanchion (1) in the order
given: dust gaiter (3), retainer ring (4)
and oil seal (5).
•
Fix the sleeve in a vice, taking care not
to damage the sleeve.
•
Insert the stanchion (1) into the sleeve
(2).
•
Position the two halves of the special
tool on the shaft (1) behind shaft seal
(5), together with the respective buffer.
•
Grip the special tool and push the shaft
seal (5) into its housing on the sleeve
(2).
•
Remove the tool.
•
Insert the retaining ring (4) into its
housing on the sleeve (2).
Suspensions
SUSP - 409