RSV4 RR-RF
•
Slide and remove the gear from the in-
take camshaft
•
Unscrew and remove the ten screws
(1-2), proceeding in stages and in a
crossed pattern.
•
Retrieve the washers from the screws
(2) near the spark plug holes.
•
Remove the U bolts with the O rings
and locator pins.
NOTE
MARK THE COMPONENTS TO PREVENT INCORRECT RE-
FITTING.
•
Remove the intake and exhaust camshafts from the rear head.
•
Remove the clutch, the tone wheel, and the primary drive gear.
•
Unscrew and remove the chain sliders'
screws.
•
Remove the chain sliders.
•
Unscrew and remove the two head fas-
tener screws (a - b) from the clutch
side.
Engine
ENG - 333