Suspensions
•
Remove the wheel hub fastening nut.
•
Retrieve the sealing washer.
•
Loosen the screws on the shaft
clamps.
•
Strike the wheel pin gently using a rub-
ber mallet in order to extract it more
easily.
•
If necessary, insert a screwdriver into
the holes on the pin.
•
Support the wheel while extracting the pin, and then remove it.
Checking the front wheel
FRONT WHEEL BEARINGS
Check the bearings installed on the wheel.
CHECK THE CONDITION OF ALL COMPONENTS AND OF THE COMPONENTS INDICATED AS
FOLLOWS IN PARTICULAR.
CHECKING ROTATION
•
Manually rotate the inner race of each bearing. The race must turn smoothly without im-
pediment or noise.
If one or both bearings are not conformant:
SUSP - 392
RSV4 RR-RF