Lennox LNINVE052 Service Manual page 99

Steps
c
Unscrew the screws fixing evaporator
mounted plate,then remove the evaporator
mounted plate.
d
Unscrew the 6 screws fixing evaporator
adjust the pipe slightly to remove the
evaporator.
7.Remove cross flow louver and motor
Remove the connection pipe of indoor and
a
outdoor unit and wire.
b
Unscrew the screws of cross flow louver
and motor.
c
Separate the cross flow louver,motor and
bearing block.
96
Procedure
screws
screws
cross flow louver
Service Manual
evaporator mounted plate
Installation and Maintenance