Lennox LNINVE052 Service Manual page 106

Service Manual
Step
Remove the 6 screws fixing the motor and then
b
remove the motor.
11.Remove condenser
Remove the 2 screws fixing the condenser and
chassis, and then lift the condenser upwards to
remove it.
12.Remove compressor
Remove the 3 foot nuts fixing compressor and
then lift the compressor upwards to remove the
compressor and damping cushion.
Note:
Keep the ports of discharge pipe and suction
pipe from foreign objects.
Installation and Maintenance
Procedure
motor
screw
screw
condenser
screw
foot nuts
compressor
damping
cushion
103