Table of Contents
Advertisement
HEIGHT OF APPLIANCE
HEIGHT OF APPLIANCE
The Pellkamin can be mounted on an optional stand or
any other appropriate support
OPTIONAL BASE
OPTIONAL BASE
Place the bottom of the base (1) in the desired
position.
Provide a power socket at the rear of the base, in such
a way that the plug is accessible once the installation
is complete.
Secure the bottom of the base to the floor with 8 mm
steel anchor bolts, to prevent it from tipping over.
Position the top of the base (2) nd adjust its height
with the provided bolts (3).
16
3
INSTALLATION
2
1
MOUNTING TO THE BASE
MOUNTING TO THE BASE
Use the provided screws to secure the appliance to
the base
Failure to observe the above instructions
can cause the insert to tip over and may
result in serious damage and injury.
Advertisement
Table of Contents
