Table of Contents
Advertisement
Night (deferred switching on/off)
This function switches the product on/off after a set
period from activation of the function.
This is convenient if you go to bed and want the product
to switch on/off after a few hours (12 hours maximum).
Activating the Night function
To access the function from the main menu (as
indicated in the Menu section above), press the M
button. Scroll using the +/- buttons and select the
function by pressing OK.
Use the "+/-" buttons to activate/deactivate the
function.
To exit without saving, press the "M" button.
Confirm by pressing the "OK" button for two seconds.
Setting the hours
Press "+" to increase the duration.
To exit without saving, press the "M" button.
Confirm by pressing the "OK" button for two seconds.
Press ON/OFF to return to the main screen.
With the Night Function active, the display shows the
moon in the top left corner.
To quit the function, return to the menu and set the
Night function to Deactivated. The procedure is the
same as for activation.
MENU
NIGHT
LOAD PELLETS
OFF
STAND BY
ON
CRONO
NIGHT
LANGUAGE
DATE-TIME
DISPLAY
BEEP
INFO
TECHNICAL MENU
NIGHT
NIGHT
OFF
OFF
ON
ON
USER INSTRUCTIONS
Load Pellets
Allows you to load pellets after the screw feeder has
emptied following a no-pellets alarm.
Useful for the technician during commissioning.
Available only in the OFF state. If you attempt to activate
the function in other states, access is not granted.
To access the function from the main menu (as
indicated in the Menu section above), press the M
button. Scroll using the +/- buttons and select the
function by pressing OK.
Use the "+/-" buttons to activate/deactivate the
function.
Press "M" to quit without saving.
Confirm by pressing the "OK" button for 2 seconds
LOAD PELLETS
STAND BY
CRONO
NIGHT
LANGUAGE
DATE-TIME
DISPLAY
BEEP
INFO
TECHNICAL MENU
NIGHT
Language
Selects the language.
OFF
This displays the first time the remote control is
ON
activated with the product powered on, or by selecting
the option from the menu.
To access the function from the main menu (as
indicated in the Menu section above), press the M
button. Scroll using the +/- buttons and select the
function by pressing OK.
Use the "+/-" buttons to select the language.
To exit without saving, press the "M" button.
Confirm by pressing the "OK" button for two seconds.
LOAD PLTS
MENU
OFF
ON
MENU
LANGUAGE
LOAD PELLETS
ENGLISH
STAND BY
ITALIANO
CRONO
FRANCAIS
NIGHT
DEUTSCH
LANGUAGE
ESPANOL
DATE-TIME
PORTUGUES
DISPLAY
NEDERLANDS
BEEP
DANSK
INFO
TECHNICAL MENU
LOAD PLTS
OFF
ON
39
Advertisement
Table of Contents
