Fitting The Traveller Plus (Option A) - Britax Traveller Plus Manual

Fitting the Traveller Plus (Option A)

1
1 . Where possible, remove the vehicle seat
head-rest. Then place the Traveller Plus on
the vehicle seat. Fasten the buckle and pull
the harness taught.
3
3. ... and then pass the seat-belt back
through the second seat-belt routing slot
to the front of your child seat.
Upper
anchorage point
ANCHORAGE POINTS
The points at which your vehicle seat-belt
is attached are known as anchorage points.
10
2
2 . Pull the seat-belt fully out and hold the
lap and the diagonal sections together.
Keep them together as you pass the seat-
belt through the first seat-belt routing slot,
indicated in red on the Traveller Plus ...
4
4. Fasten the seat-belt, making sure it is
not twisted.
Before moving on to step 5 please read the
‘Anchorage Points’ information below.
Upper
anchorage point
Depending on the position of the upper
anchorage point, the seat-belt should be
routed as shown above.