De Zitverkleiner Bevestigen; Fitting The Head Support - Britax ROMER BABY-SAFE User Instructions

Table of Contents

Advertisement

autoritten hiervoor. Denk er ook buiten de auto
aan uw baby niet te lang in de kuip te laten
zitten.
• Als uw baby nog zeer klein is, kan de
meegeleverde zitverkleiner worden gebruikt om
het hoofd van uw baby te ondersteunen en de
ergonomische houding te verbeteren.
Voorzichtig! Gebruik de zitverkleiner alleen in
de onderste gordelsleuven van de kuip (zie 3.1).

3.1 De zitverkleiner bevestigen

De zitverkleiner geeft uw nog kleine baby de
noodzakelijke steun.
Deze kan eenvoudig op de schoudergordels
worden geschoven. De schoudergordels
door de onderste gordelsleuven
lopen.
U kunt de zitverkleiner gebruiken tot uw baby zo
groot is dat u de schoudergordels
moet verstellen (zie 3.3).
Maak de schoudergordels
verbindingsstuk 17.
3
3
moeten
6
van de kuip
3
in de hoogte
3
los van het
frequent breaks during long journeys. Even
outside of the car, please avoid leaving your
baby in the baby seat for too long.
• If your baby is still very small, the supplied head
support will provide additional support for your
baby's head and improve comfort.
Caution! Only use the head support in the lower
belt slots of the baby shell
(see 3.1).

3.1 Fitting the head support

The head support gives your baby the
necessary support while he or she is still small.
Simply thread the shoulder straps
belt slots of the head support. The shoulder straps
3
must run through the lowest belt slots
baby seat.
You can use the head support until your baby has
grown to a size where you must adjust the height of
the shoulder straps
3
(see 3.3).
Unhook the shoulder straps
connecting piece 17.
3
through the
6
of the
3
from the
12

Advertisement

Table of Contents
loading

Table of Contents