Britax TRIFIX i-SIZE User Instructions

PAGE I
1. PRODUCT OVERVIEW
We are pleased that you have chosen our TRIFIX i-SIZE
In order to protect your child correctly, the TRIFIX i-SIZE
03
04
05 06
01 02
Shoulder pads
01 ISOFIX fastening points (car) 07
ISOFIX insertion aids Shoulder straps
02 08
Headrest Adjustment button
03 09
Adjustment belt
Harness buckle 10
04
Release button Tilt adjustment lever
05 11
Safety button Adjusting ring of the headrest
06 12

4. CARE AND MAINTENANCE

Cleaning
Please only use authentic BRITAX RÖMER replacement seat covers. The
seat cover is an integral part of the child safety seat and is key to ensuring the
trouble-free functionality of the system. Replacement seat covers are available
from your dealer.
• The cover can be removed and washed with a mild detergent in the
delicates programme of the washing machine (30°C). Please observe the
instructions on the washing label of the cover.
• The shoulder pads can be removed and washed in luke-warm soapy
water.
• The plastic parts and the harness can be cleaned with soapy water. Do not
use any caustic cleaning agents (such as solvents).
Care for the harness buckle
To ensure the safety of your child, it is absolutely essential that the harness
buckle continues to function correctly. Harness buckle malfunctions are usu-
ally caused by a build-up of soiling or by external objects:
• When you press the red release button, it takes a long time for the buckle
tongues to be ejected.
• The buckle tongues no longer engage (i.e. when you try to push them in,
they pop out again).
• The buckle tongues engage without an audible "click".
• The buckle tongues are difficult to push in (you feel a certain amount of
resistance).
• The buckle can only be opened by applying extreme force.
Remedy: Clean the harness buckle so that it functions properly again with no
trouble:
Cleaning the harness buckle
04
18
19
to accompany your child safely through a new stage of his or her life.
must always be used and installed as described in these instructions.
12
13
07
14
08
15
09
10
11
16
Top tether
13
Operating instructions compartment
14
Fabric loop
15
ISOFIX locking arms
16
Seat shell
17
1. Open the harness buckle (press the red release button).
04
2. Unhook the elastic seam of the cover from the bottom edge of the seat
shell 17 .
3. Open the Velcro fastener on the crotch pad
buckle 04 along with the cover.
4. Rotate the crotch harness with the metal plate
ness buckle in the seat shell 17 by 90° in the longitudinal slot.
04
5. Slide the metal plate through the harness slot
19
facing forwards.
6. Soak the buckle 04 in warm water containing washing-up liquid for at least
an hour. Rinse the buckle thoroughly and dry it.
7. Slide the metal plate fully into the longitudinal slot from the front.
19
8. Rotate the crotch harness with the metal plate
into the harness slot 20 on the seat shell
of motion.
DANGER! Tug hard on the harness buckle
secure in the seat shell .
17
9. Thread the harness buckle 04 through the crotch pad
and then re-fasten the Velcro fastener and the cover.
Removing the cover
08
03
11
1. Push the tilt adjustment lever 11 upwards and slide back the seat shell
to upright position.
2. Loosen the shoulder straps 08 as far as possible.
3. Open the harness buckle (press the red release button).
04
4. Open the Velcro fastener on the crotch pad
5. Slide the headrest 03 into the lowest position.
6. Pull off the cover of the headrest 03 .
7. Open the snap fasteners on the left and right of the rear part of the cover.
8. Turn over the rear part of the cover onto the seat surface.
9. Thread the shoulder straps through the recesses in the cover. Unhook
08
20
the elastic seam of the cover from the bottom edge of the seat shell.
TIP: Start with the handles on the side and top of the seat shell.
2. APPROVAL
These instructions use the following symbols stated below:
Symbol Keyword
DANGER!
WARNUNG!
CAUTION!
TIP:
The TRIFIX i-SIZE is exclusively intended to secure your baby
in your vehicle.
BRITAX RÖMER
17
child safety seat
TRIFIX i-SIZE
*ECE = European Standard for Child Safety Equipment
The child safety seat has been designed, tested and approved according to
the requirements of the European Standard for Child Safety Equipment (ECE
R 129/01). The seal of approval "E" (in a circle) and the approval number are
located on the orange approval label (sticker on the child safety seat).
DANGER! This certification will be invalidated if you make any modifica-
tions to the child safety seat. Only the manufacturer is permitted
to make modifications to the child safety seat. Unauthorised
technical changes can cause the protective function of the
seat to be reduced or completely eliminated. Do not make any
technical changes to the child safety seat.
DANGER! Use the TRIFIX i-SIZE
vehicle. It is in no way suitable for use as a seat or toy in the
home.
10. Pull the cover up and over the border of the strap adjuster.
11. Unthread the harness buckle
12. Pull the cover upwards a little and then put it with the recess over the
headrest .
03
18 and pull it over the harness
DANGER! The child seat must not be used without the seat cover.
which holds the har-
19
Reattaching the cover:
20 with the narrow edge Proceed in reverse order to put on the cover.
Caution: The harnesses must not be twisted and must be correctly posi-
tioned in the harness slots.
Removing the shoulder pads
19 by 90° until it is hooked
03
perpendicular to the direction
17
07
to make sure that it is
04
08
18 on the cover
1. Loosen the shoulder straps
2. Slide the headrest
03
3. Fold up the bottom part of the headrest
4. Open the shoulder pads
Rear of the child safety seat
5. Open the operating instructions compartment
04
18 6. Pull out the shoulder straps
of the shoulder pads
7. Unhook the strap loops from the plastic fasteners
17
juster.
8. Pull the shoulder pads
Re-attaching the shoulder pads:
.
18
Simply follow the steps above in reverse order.
Caution: The shoulder pads
changed places. The shoulder straps
cover band in the shoulder pads
21
3. USE IN THE VEHICLE
Please observe the instructions for using children's restraining systems in the
operating instructions of your vehicle. During use, be sure to observe any restric-
Explanation
tions relating to airbags.
Risk of severe personal injury
Please refer to the operating instructions for your vehicle for information about
vehicle seats which are certified for the use of children's restraining systems according
Risk of minor personal injury
to ECE R16.
Risk of material damage
TRIFIX i-SIZE
Useful notes
BRITAX RÖMER
child safety seat
Tested and approved according to
ECE* R 129/01
Body size Body weight
You can use your child safety seat as follows:
76–105 cm ≤ 22 kg
In the direction of travel
Against the direction of
travel
On seats featuring:
ISOFIX fastenings (be-
tween the seat surface
and backrest) and top
tether anchoring points
(e.g. on the loading area,
on the floor or behind the
backrest)
(Please observe the applicable regulations in force in your country)
1) Using the seat in a backwards-facing car seat (e.g. in a van or minibus) is only permitted if
the car seat is also approved for transporting adults. The seat may not be in the area of effect
exclusively for securing your child in your
of an airbag.
2) If there is a passenger airbag: Slide the passenger seat well backwards and follow any
relevant directions in your vehicle's operating instructions.
04 and the strap end 09 from the cover.
TRIFIX i-SIZE
08
User instructions
07
25
08 as far as possible.
into the second position from the top.
03 upwards.
07 at the Velcro fasteners at the side.
14 .
08 a little so that you can see the strap loops
underneath.
07
of the height ad-
25
forwards out of the harness slots.
07
07 or harnesses must not be twisted or
must be located under the black
08
.
07
www.britax.com
usage options:
Vehicle seat position with ISOFIX and
top tether
i-Size Not i-Size
TRIFIX i-SIZE
Yes 1)
76–105 cm
No ≤ 22 kg
Yes 2)
76–105 cm
≤ 22 kg
GB