Movement - Mitsubishi Electric MELSEC-L Series User Manual

8.4.11

Movement

Specify the operation after the status is switched to RUN in the following cases. (
• Power OFF
• Reset → RUN
• STOP → RUN
(1) Setting screen
(2) Setting items
Item
Operation at transition to RUN
Auto Start
Start by User Operation
→ ON
Specify the operation at the time of status change, from power on to RUN, from reset
to RUN, or from STOP to RUN, after registration of the data logging setting.
Data logging is automatically started.
Data logging is temporarily stopped. To restart the data logging, the user must
perform a specific operation.
CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL
Description
Page 74, Section 7.1)
Setting range
-
111
8