Mitsubishi Electric MELSEC-L Series User Manual page 153

No.
Data logging operation was performed during execution of the CPU module
28
change function with SD memory card (backup and restoration).
Registration of a data logging, in which a device of a nonexistent module or
29 an inaccessible device was specified, was attempted. (when Un\G
specified for device)
While the data logging function is in operation (the logging status is
30 "Executing", "Saving the logging data", "Completed", "Pausing", or "Error"),
execution of an inexecutable function was attempted.
When creating the data logging file, the target memory does not have the
31
required free space.
The SD memory card is write-protected. Or, data logging file writing to the
32
target memory was not completed due to incorrect folder or file configuration.
While the saved file number has reached the maximum of FFFFFFFF
33
registration of a data logging was attempted. Or, the number reached the
34
maximum of FFFFFFFF during execution.
H
While the data logging function is in operation with a step number specified in
"Sampling" or "Trigger" (the logging status is "Executing", "Saving the
35
logging data", "Completed", "Pausing", or "Error"), online change was
attempted.
Registration of a data logging was attempted in the state where a sub-folder
for storing a data logging file (or folder) cannot be created, or in the
36
inaccessible state. Or, the file was not created or accessed in the status of
"Executing" or "Saving the logging data".
Registration of a data logging was attempted even though file (folder)
creation or access is disabled because the same file (folder) name already
37
exists is used for the data logging. Or, the file was not created or accessed in
the status of "Executing" or "Saving the logging data".
The number of files in the root folder and sub-folders of the target memory,
38 which were created from the configuration tool on a different connected
device from the one at the time of registration, has exceeded the maximum.
While the data logging function is in operation (the logging status is
"Executing", "Saving the logging data", "Completed", "Pausing", or "Error"),
39
the SD memory card was removed, or the SD memory card lock switch was
slid up.
40 System error
41 Request or setting data error
Error cause
Value in special register
Timing of
(Data logging error cause
occurrence
• Registration
• Cancel
is Registration
During execution
,
Registration
H
During execution
Registration
During execution
Registration
During execution
Any time
CHAPTER 13 TROUBLESHOOTING
Error response
No.
information)
4332
-
H
217 4043
H H
4276
-
H
501
H
-
502
H
213 4278
H H
503
H
-
504
H
214 41CC
H H
505
-
H
218 41CD
H H
507
H
508
H
-
506
H
F00
H
F01 4080
H H
151
13