Mitsubishi Electric MELSEC-L Series User Manual page 121

(3) Setting items and buttons
Item
PC side I/F
PLC side I/F
Other Station Setting
No Specification
Other Station (Single Network)
Other Station (Co-existence Network)
Network Communication Route
button
button
button
Set the interface of the personal computer.
Set the interface on the CPU module side.
Select this when accessing the LCPU that is directly connected to
the personal computer.
Select this when accessing a CPU module on another station via a
single network (including a multi-layer system).
Select this when connecting a personal computer and a Q series
CPU module and accessing from the CPU module to another CPU
module on another station via CC-Link or a serial communication
module.
For an access to another station via a network, select a network type,
and specify the network No. and station No. and head I/O. The
settings differ depending on the network type.
Display a list of routes. Since a route selected from the list is
automatically set in the "Transfer Setup" dialog box, the setting is
easy even in the case of a complex system.
Enables the setting for directly connecting the CPU module and a
button
personal computer.
Checks if an access to the CPU module specified in the "Transfer
Setup" dialog box is possible or not. If the access is made properly,
the model name of the accessed CPU module is displayed in the
"PLC Type" box.
Displays a graphical image of the configured route.
CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL
Description
-
Reference
-
-
-
-
-
-
-
Page 121, Section 8.6.4
Page 116, Section 8.6.1
Page 120, Section 8.6.3
8
-
119