Debugger Menu; Open Project - Wiznet W7100 Debugger User Manual

5 Debugger menu

5.1

Open project

The W7100 debugger can debug the KEIL project or the hex file. To debug the KEIL project
or the hex file, run the W7100 debugger and open the hex file.
Open Project.
The Open Project command is used to open a project.
Click the icon of the toolbar. It can also be done by clicking Project Menu => Open or
pushing the short key Ctrl + O
The file open browser is opened as figure 5.2 'File open browser.'
© Copyright 2009 WIZnet Co., Inc. All rights reserved.
[Fig.5.3] Open project
13