Table of Contents
Advertisement
Confirm the HEX file in the project directory after compiling.
[Fig.4.4] Hex file of the KEIL project
If the user use the assemble code, the user could have a xxx.SRC file in the KEIL project.
Then the user must delete the xxx.SRC file and check the 'Generate Assembler SRC File' and
'Assemble SRC File' options to avoid error on the W7100 debugger. (The error message is
shown as in the figure 5.4.)
[Fig.4.5] Deleting the xxx.SRC file
© Copyright 2009 WIZnet Co., Inc. All rights reserved.
11
Advertisement
Table of Contents
