Table of Contents
Advertisement
Options
5
Start-up-Service
5 Options
5.1 Start-up-Service
The start-up service includes the installation of the scanners into the protective housing boxes, checking all wiring,
communications, and services from the scanners to the location of the computer. The scanner alignment will be
checked and corrected as necessary. Software will be installed, and all users will be trained on the full operation
of the system, including routine maintenance procedures. The entire system will be operational before the final
acceptance and sign-off by the customer. The manufacturer does not provide construction, erection, mechanical,
electrical, or building services. Prior to the start-up service the scanner housings should be installed in the
designated locations per our recommendations. All wiring should be in place and the associated electronics
positioned in the control room. The manufacturer will check the final connections and power the system. The
scanner heads should not be put into the protective housings until this start-up service begins.
Note
The startup service option is not included in the CS standard package, it must be ordered as a separate line
item!
29
Advertisement
Table of Contents
