Table of Contents
Advertisement
4.2.1 Cable Entry System
The cable entry system is a split system that allows pre-assembled cables to be routed into the system connection
box without disassembling the connectors.
3
Snap-on mounting
3
Illustrations: © Murrplastik
Lay cable into appropriate grommet and provide strain relief where
necessary using cable ties.
Use appropriate tool to punch through cover on base frame.
Set catch hooks into the sides of the cut-out.
Insert rail completely.
The grommet must produce a continuous seal on the back side.
Set the rail onto the catch hooks and press on.
Installation
4
System Connection Box
25
Advertisement
Table of Contents
