SunStar KM-2510A Manual/Parts Book page 20

FOR SAFE OPERATION
1. To avoid electrical shock hazards, neither open the cover of the electrical box for the motor
nor touch the components mounted inside the electrical box.
1. To avoid personal injury, never operate the machine with any of the belt cover, finger guard
of safety devices removed.
2. To prevent possible personal injuries caused by being caught in the machine. Keep your
fingers, head and clothes away from the handwheel, cover and the motor while the machine
is in operation. In addition, place nothing around them.
3. To avoid personal injury, never put your hand under the needle when you turn ON the power
switch or operate the machine.
4. To avoid personal injury, never put your fingers into the thread take-up cover while the mac-
hine is in operation.
5. The hook rotates at a high speed while the machine is in operation. To prevent possible inj-
ury to hands, be sure to keep your hands away from the vicinity of the hook during operation.
In addition, be sure to turn OFF the power to the machine when replacing the bobbin.
6. To avoid possible personal injuries, be careful not to allow your fingers in the machine when
tiling/raising the machine head.
7. To avoid possible accidents because of abrupt start of the machine, turn OFF the power to
the machine when tiling the machine head.
8. If your machine is equipped with a serve-motor, the motor does not produce noise while the
machine is at rest. To avoid possible accidents due to abrupt start of the machine, be sure to
turn OFF the power to the machine.
9. To avoid electrical shock hazards, never operate the sewing machine with the ground wire
for the power supply removed.
10. To prevent possible accidents because of electric shock or damaged electrical compon-
ent(s), turn OFF the power switch in prior to the connection/disconnection of the power plug.
6 20