Name Of Parts / Accessories; Dimensions - SMC Networks EX510-GDN1 Operation Manual

Name of Parts / Accessories

1
6
2
3
8
7
No. Parts
Communication Connect to DeviceNet line with an accessory
1
socket (BUS) connector for DeviceNet (
Supplying power for output instruments
Power supply
2 such as a solenoid valve with an accessory
socket (PWR(V))
connector (
Supplying power for controlling GW and for
Power supply
3 input instruments such as a sensor with an
socket (PWR)
accessory connector (
GW unit side branch Connecting an input unit etc. by using
4
connector (for input) branch cables ( EX510-FC
GW unit side branch Connecting SI unit (manifold valve) etc. by
5
connector (for output) using branch cables ( EX510-FC
6 PE terminal Used for grounding
7 Mounting hole Used when a unit is mounted with 2 M4 screws.
8 DIN rail mounting slot Used when a unit is mounted to DIN rail.
Display/ setting Setting switch such as LED display of unit
9
switch area state, MAC ID, Baud rate and I/O point.
*Note: For wiring method, see "Wring" in the "Technical Specifications".
8
9
10
11
5
Power supply
Communication
connector for connector
4
(2 pcs)
DeviceNet (1pc)
Accessory
Purpose
). *
). *
). *
)
Dimension (in mm)
PWR
(V)
PWR
)
64
BUS
INPUT OUTPUT
COM D
COM C
COM B
COM A
25.7
16
9 9