Advertisement
72.
Position Rear Facia (angle cut ends) and Side
Facia (square cut ends) in corner. Line up so angle
cut Facia caps square cut Facia. Attach angled Facia
to Nailing Strip with 8 - 1 1/2" Finishing Nails per
piece. Gap Where Facia boards come together at
peak will be covered by a detail plate in Step 72. Do a
dry run using Side Facia to help you correctly position
before attaching.
Parts (Steps 72 - 73)
Angle Cut Facia
(3/4" x 3 1/2" x 58") x 4
Square Cut Facia
(3/4" x 3 1/2" x 49 1/4") x 4
73.
Attach remaining Front & Rear Facia as per Step 72 and attach Side Facia to Rafter ends.
There are 2 Facia pieces per side. Secure with 8 - 1 1/2" Finishing Nails per piece, ensure nails
connect with the ends of the Rafters behind the Facia. Gaps between Facia pieces will be cov-
ered by Detail Plates in Step 74.
74.
Attach Pentagon Facia Plates where Front &
Rear Facias meet at the peak. Secure with 4 - 1 1/2"
Finishing Nails per piece. Attach Facia Detail Plates
to cover seams where Side Facia Pieces meet.
Secure with 4 - 1 1/2" Finishing Nails per piece.
Attach Horizontal Gable Detail Plates to cover
seams where Horizontal Gable Trims meet. Secure
with 4 - 1 1/2" Finishing Nails per piece.
Parts (Steps 74)
Pentagon Facia Plate
(1/2" x 5 1/2" x 8") x 2
Facia Detail Plates
(1/2" x 3 1/2" x 8") x 2
Horizontal Gable Plates
(1/2" x 4 1/2" x 8") x 2
Toll Free 1-888-658-1658
Hardware (Steps 72 - 73)
N1 - 1 1/2" Finishing
Nails
x 64 total
Hardware (Steps 74)
N1 - 1 1/2" Finishing
Nails
x 24 total
www.outdoorlivingtoday.com
Page 34
Square
Cut Facia
Horizontal Gable
Detail Plate
sales@outdoorlivingtoday.com
Angle Cut
Facia
Pentagon Facia
Detail Plate
Facia Detail
Plate
Advertisement
