Advertisement
43.
With both Ridge Boards connected, completely secure Gable framing to
walls and rafters. Use 4 - 2" screws per Rafter. Use an additional 6 - 2"
screws to secure Gable to wall. Note: you may have to remove the 2 tem-
porary screws in Gable from Step 32 and reposition Gable for best fit prior
to completing gable attachment.
1 1/4" Screw
2" Screws
Expert Advice: While securing Roof
Gussets have two helpers push the side
walls together so the inside measurment
remains 91" across as per Step 41.
45.
Roof Gussets are positioned on both mid Rafters.
Slide Gusset up, use a level to square Gusset and attach
to Rafters with 4 - 2" screws. Pilot hole each Gusset end
with 1/8" drill bit. Complete remaining Gusset.
Toll Free 1-888-658-1658
2" Screw
1 1/4" Screw
2" Screws
www.outdoorlivingtoday.com
44.
Rafter Brackets where rafters meet
2" Screw
Top Wall Plates inside of shed.
Attach with 2 - 1 1/4" screws and 2 -
2" screws per Single Bracket and
6 - 2" screws per Double Bracket.
Y31 - Double Rafter Brackets
Parts (Steps 45)
Gussets
(3/4" x 3 1/2" x 72") x 2
(angle cut on ends)
Page 22
Hardware (Step 43)
S2 - 1 1/4" Screws
x 28 total
Attach all Single and Double
Hardware (Step 44)
S2 - 1 1/4" Screws
x 8 total
S3 - 2" Screws
x 20 total
Y30 - Single Rafter Brackets
x 4 total
x 2 total
Hardware (Steps 45)
S3 - 2" Screws
x 8 total
sales@outdoorlivingtoday.com
Advertisement
