Download Print this page

Table Of Contents - OLT Gardener's Shed GAR88-FJ-METAL Assembly Manual

8x8 metal roof - finger jointed siding

Advertisement

D. Miscellaneous Section
Exploded view of all parts necessary to complete the
Miscellaneous Section. Identify all parts prior to starting.
Facia Nailing
Cleat (4)
Trim (4)
Side
Facia (4)
Front and
Rear Facia
(4)
Bottom
Skirting (8)
Narrow Trims 79" (2)
61.
Attach Bottom Skirting (Bevel) around the base of the shed.
Bevel is thicker at bottom of board than the top. Skirting will hide floor
framing. The side skirting pieces will meet together in the center.
Gaps on outside will be covered by Wide Trim pieces later. Start side
skirting pieces first then rear, then front skirting pieces last and attach
with 4 - 1 1/2" finishing nails per piece.
Toll Free 1-888-658-1658
Wide Corner
Tee Hinges (3)
Trims (4)
www.outdoorlivingtoday.com
Solid Door
2 pieces of Bottom
Skirting for front and
rear. 2 pieces for sides.
Page 29
Not Shown: missing from
exploded drawing: Interior
Door Stops, Top Wall Trim.
Pentagon
Facia Piece (2)
Facia / Trim
Detail Plate
(4)
Window Trim
Flower
Box
Front and Rear
77 1/2" long
Door Hardware
(Pull Handle
and Barrel Bolt)
Gap in corner
Parts (Steps 61)
Bottom Skirting - FJ
(1/2" x 4 1/2" x 45 1/4") x 8
Hardware (Steps 61)
N1 - 1 1/2" Screws
x 32 total
sales@outdoorlivingtoday.com
Window
insert

Advertisement

loading