Advertisement
49.
Locate 2 more Roof Battens. Place both
Battens flush against Batten Spacers installed in
Step 48. Battens will overhang outside Rafter by 2
3/4" and meet on doubled up Rafters in the center.
Attach Battens with 3 - 1 1/4" screws each (6 total).
Locate 2 more Batten Spacers and attach below
2nd row of Battens as per Step 48.
50.
Attach 3rd row of Battens (1 Roof Batten Long
& 1 Roof Batten Short) as per Step 47. Have the
seam between Battens in the 3rd row on the oppo-
site side as the first. Attach the final pair of Batten
Spacers for this side following the 3rd row as per
Step 48. Attach final row of Battens (2 Roof Battens
Center) below the 3rd spacer. Final row of Battens
should land 1/2" from end of Rafter.
Toll Free 1-888-658-1658
Parts (Step 49)
Roof Battens
(3/4" x 3 1/2" x 48 1/4") x 2
Batten Spacers
(3/4" x 1 1/2" x 14") x 2
Parts (Step 50)
Roof Battens
(3/4" x 3 1/2" x 48 1/4") x 4
Batten Spacers
(3/4" x 1 1/2" x 14") x 2
www.outdoorlivingtoday.com
Page 24
Hardware (Step 49)
S2 - 1 1/4" Screws
x 10 total
1/2" from Rafter
Hardware (Step 50)
S2 - 1 1/4" Screws
x 16 total
sales@outdoorlivingtoday.com
Advertisement
