Canon DADF-J1 Service Manual page 191

CHAPTER 5 TROUBLESHOOTING
6) At the end of operation, press the push
switch (SW2) on the ADF controller
PCB once again.
• The copy paper will be delivered, and
the adjustment value will be stored in
memory.
1.3.2 Adjusting the Speed of the
Feeding Belt
Adjusting the speed of the feed-
ing belt will automatically ad-
Memo just the speed of reversal.
1) Remove the ADF cover, and set the DIP
switch (SW1) on the ADF controller
PCB as indicated.
2) Press the push switch (W2) on the ADF
controller PCB.
• LED2 will start to flash to indicate the
current value.
5-34
COPYRIGHT © 2001 CANON INC.
Switch
SW3 Increases the arching.
SW4 Decreases the arching.
T05-103-04
ADF controller cover
Screw
F05-103-05
F05-103-06
J1
FU2
J2
J4
IC1
FU1
SW1
J5
LED2
J3 SW4SW3SW2
J6 J7
SW2
F05-103-07
2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
Change
J14
J13
J12
J8 J9 J10 J11