Table of Contents
Advertisement
CHAPTER 3 MECHANICAL SYSTEMS
3.1.5 Removing the Feeding (pull-
off) Roller
1) Remove the mounting screw [2] of the
gear support plate [1] of the pickup
front side plate.
2) Remove the E-ring [3], washer [4], two
shims [5], gear (black) [6], gear (white)
[7], two shims [5], and spring [8] in se-
quence.
3) Remove the gear support plate of the
front side plate.
4) Remove the E-ring [10], gear [11], par-
allel pin [12], grip ring [13], and bear-
ing [14] of the feeding (pull-off) roller
[9] (front side plate).
3-22
COPYRIGHT © 2001 CANON INC.
[2]
F03-301-24
[8]
[5]
F03-301-25
[14]
[13]
[12]
[9]
F03-301-26
2000 2000 2000 2000
CANON DADF-J1 REV.0 MAR.2001
[1]
[7]
[6]
[5]
[4]
[3]
[11]
[10]
Advertisement
Table of Contents
Troubleshooting
