Canon DADF-J1 Service Manual page 174

6) Close the DADF, and press the push
switch (SW2) on the ADF controller
PCB once.
• The original will be delivered to the
delivery tray.
If the Value Is Not As Indicated
If the value is not as indicated, adjust the
position of the original tray.
1) Loosen the tray fixing screw, and adjust
the position of the original tray.
2) At the end of the adjustment, loosen the
original tray fixing screw.
3) Set the DIP switch (SW1) on the ADF
controller PCB back to its initial setting,
and mount the ADF controller cover.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 5 TROUBLESHOOTING
J1
FU2
J2
J4
IC1
FU1
SW1
J5
LED2
SW4SW3SW2
J3
J6
SW2
F05-101-35
Screw
Screw
If C>2.4 mm, shift the original tray toward the
rear.
If C<2.4 mm, shift the original tray toward the
front.
F05-101-36
J14
J13
J12
J7 J8 J9 J10 J11
Original tray
5-17