Canon DADF-J1 Service Manual page 128

5) Remove the grip ring [8] and the bear-
ing [9] from the manual feed registra-
tion roller [6]. (delivery assembly front
side plate)
6) Remove the grip ring [9] of the manual
feed registration roller [6], and remove
the E-ring [11] of the feeding belt roller
shaft [10]; then, remove the gear [12]
and the parallel pin [13]. Thereafter, re-
move the gear unit [14] and the bushing
[15].
7) Remove the E-ring [14] and the bearing
[15] of the manual feed registration
roller [6] (delivery assembly rear plate);
then, pull out the manual feed registra-
tion roller [6].
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 3 MECHANICAL SYSTEMS
[8]
[6]
F03-301-21
[14]
[15]
[9]
F03-301-22
[15] [14]
F03-301-23
[7]
[13]
[12]
[6]
[11] [10]
[6]
3-21