Gasboy Islander PLUS Installation Manual page 121

Fault Probable Cause
Incorrect Address
settings
Faulty Printer
Paper is not being Incorrect SiteOmat
cut at the end of setting
the printing
Faulty Printer cutter
Faulty Printer
Islander PLUS Manual
Table 5-3. Printer Troubleshooting (Cont'd)
Checks
No communication to Printer (Continued)
Check printer address
jumpers (no Jumper
means address is 70HEX)
Paper is not automatically cut
Check SiteOmat printing
settings
Corrective Action
Set the correct Hex address
in SiteOmat
Replace Printer
Set SiteOmat printing
settings accordingly
Replace Printer cutter
Replace Printer
107