Power On/Off; Turning On The Power; Turning Off The Power - Hitachi CP-X300 User Manual

Power on/off

Turning on the power

1.
Make sure that the power cord is firmly and correctly
connected to the projector and the outlet.
2.
Remove the lens cover, and set the power switch to
ON position (marked " I ").
The POWER indicator will light up in steady orange
(56). Then wait several seconds because the
buttons may not function for these several seconds.
3.
Press STANDBY/ON button on the projector or the
remote control.
The projection lamp will light up and POWER indicator
will begin blinking in green. When the power is
completely on, the indicator will stop blinking and light
in steady green (56).
To display the picture, select an input signal according to the section "Selecting an input
signal" (16).

Turning off the power

1.
Press the STANDBY/ON button on the projector or the remote control. The message
"Power off?" will appear on the screen for about 5 seconds.
2.
Press the STANDBY/ON button again while the message appears.
The projector lamp will go off, and the POWER indicator will begin blinking in orange.
Then POWER indicator will stop blinking and light in steady orange when the lamp
cooling is complete(56).
3.
Make sure that POWER indicator lights in steady orange, and set the
power switch to OFF position (marked "O").
POWER indicator will go off. Attach the lens cover.
Do not turn the projector on for about 10 minutes or more after turning it off. Turning the projector
on again too soon could shorten the lifetime of some consumable parts of the projector.
WARNING ►A strong light is emitted when the projector's power is on. Do
not look into the lens of the projector or look inside of the projector through any
of the projector's openings.
►Do not touch around the lamp cover and the exhaust vents during use or just
after use, since it is too hot.
NOTE • Turn the power on/off in right order. Please power on the projector prior
to the connected devices. Power off the projector after all of connected devices are
powered off.
• The projector has the AUTO ON function, which can make the projector automatically
turn on. For more information, please see AUTO ON item of OPTION menu (40).
• Use the shutdown switch (57) only when the projector is not turned off by
normal procedure.
Power on/off
COMPUTER
VIDEO SEARCH
ASPECT AUTO BLANK
MAGNIFY
HOME PAGE UP VOLUME
ON
END PAGE DOWN MUTE
OFF
FREEZE MY BUTTON KEYSTONE
1 2
POSITION MENU
ENTER
ESC RESET
VIDEO COMPUTER
ASPECT
MAGNIFY
ON
OFF
FREEZE
POSITION
ESC
5
SEARCH
AUTO BLANK
HOME PAGE UP VOLUME
END PAGE DOWN MUTE
MY BUTTON KEYSTONE
1 2
MENU
ENTER
RESET