Summary of Contents for Backyard Creations FRN-913040
Page 1
3 PC Rocking Bistro Set Assembly & Care Instructions SKU #: 272 1917 Model #: FRN-913040 IMPORTANT : RETAIN FOR FUTURE REFERENCE READ CAREFULLY The schematics in this manual are for assembly and operation illustration only. They may differ from the actual appearance.
Hardware Contents Part Description Quantity Bolt (M6*42) Washer Screw Nut Hex Key Wrench Assembly Step 1: Be careful to place the glass table top (A) upside down on a soft, flat surface. Insert the end of table legs (B) into the plastic hole of the table top.
Assembly (continued) Step 2: Align the leg brace (C) holes with the corresponding table leg (B) holes. Place a washer (BB) over the holes and insert the bolts (AA) to attach the frame from the outside of the table legs (B). Use the hex key (DD) to screw in the bolts (AA) and the wrench (EE) to screw in the screw nut (CC).
Rocking Chair Package Contents Part Description Quantity Right Arm Left Arm Seat & Back Front Connect Bar Bottom Leg Bar Preparation CAUTION: Do not use sharp tools to remove the protective material, as it may damage the product. Before assembling make sure all parts are present. Compare parts with package contents list and hardware contents list.
Assembly Step 1: Place the contents on a soft, flat surface. Align the bottom leg bar (H) hole with the right and left arm (D and E) as shown in the image above. Use the hex key (JJ) to tighten the short bolts (FF), being careful not to over tighten. HH FF Step 2: Align the front connect bar (G) with the right and left arms (D and E).
Page 7
Assembly (continued) Step 3: Unfold the seat and back (F). Align the chair back with the holes on both arms. Insert the long bolts (GG) through the washers (HH) and into the holes. Use the hex key (JJ) to tighten the bolts, being careful not to over tighten. Step 4: Lay the chair on its side.
Page 8
Assembly (continued) Step 5: Align the other side of the chair seat with the hole of the other arm (D or E). Insert the long bolt (GG) through the washers (HH) into the hole. Finally, use the hex key (JJ) to tighten the all bolts. Repeat assembly steps for the second chair.
Warranty ONE YEAR WARRANTY This product is covered under a manufacturer’s one year warranty from date of purchase against defects in materials and workmanship. This warranty does not cover damage due to neglect, abuse or weather related damage. For full warranty disclosure, email us at customerservice@atleisure.com, call toll free at 1-855-880- 7205 or send mail to: 1040 Boulevard SE Ste.
Replacement Parts For replacement parts, call our customer service department at 1-855-880-7205, 8:00am-5:00pm., EST, Monday-Friday. Hardware Kit (table) Hardware Kit (chair) Part Description Quantity Part Number Table Leg FRN-913040T-B Table Leg Brace FRN-913040T-C Hardware Kit (table) FRN-913040T-KIT Right Arm FRN-913040C-AA Left Arm FRN-913040C-BB Seat &...
Page 11
ATLeisure, LLC 1040 Boulevard SE, Suite B Atlanta, Georgia 30312, USA Customer Service Toll Free 1-855-880-7205 8am - 5pm Eastern Time, Monday through Friday www.atleisure.com 2021 Distributed by Menard, Inc., Eau Claire, WI 54703 Made in China...
Need help?
Do you have a question about the FRN-913040 and is the answer not in the manual?
Questions and answers