Table of Contents
Advertisement
Rieju chassis
Chassis
17. FUEL TANK
* Remove the seat.
ATTENTION: before proceeding to the di-
sassembly, turn off the tap of the tank.
Remove the clamp of the tap (A/F -30), after
unscrew the 3 bolts (B/F -31) that hold the
tank on to the chassis.
A
Following, remove the cap and separate the
cover from the Tank (C/F -32).
F-30
B
C
B
F-31
F-32
18. CARBURETTOR
* Remove the seat and the fuel tank.
B
A
A
Loosen the 2 clamps (A/F -33) that hold the
carburettor on to the filter box and to the en-
gine.
Unscrew the top cover of the carburettor (B /
-F 33) and disconnect the cable of the gas.
After, disconnect the air intake sleeve and the
rest of tubes.
F-33
ATTENTION: Pay attention to the position
of the tubes for the later assembly.
36
Advertisement
Table of Contents
