Table of Contents
Advertisement
Rieju chassis
Chassis
27. HANDLEBAR
* Remove the controls from each end.
A
Unscrew the 4 bolts (A/F -48) and remove
the handlebar.
F-48
28. FRONT BRAKE PIN
Unscrew the join through the screw (A/F -
49).
A
Following, unscrew the 2 bolts (B/F -49) that
hold the pin on to the pin support.
ATTENTION: For the later assembly it is
advisable to replace the copper gaskets and
drain the circuit.
B
F-49
ATTENTION: Brake liquid is abrasive.
29. REAR BRAKE PIN
Unscrew the join through the screw (A/F -
50).
A
Following, unscrew the 2 bolts (B/F -50) that
hold the pin on to the pin support.
ATTENTION:
For the later assembly it is advisable to repla-
ce. The copper gaskets and drain the circuit.
B
F-50
ATTENTION: Brake liquid is abrasive.
42
Advertisement
Table of Contents
