Abbreviations Used In The Manual - RIEJU TANGO 125 Manual

8
Introduction

ABBREVIATIONS USED IN THE MANUAL

F
Figure
Pr Tr Tightening torque
Page
P
Ap Paragraph
S Section
Es Diagram
T Table
Tr Screw
Note:
The letter Tr in the illustrations refers to retaining or adjusting screws. The
number following this letter refers to the number of the same type of screw
in the unit or component described and illustrated. Letters not followed by
a number indicate a single screw . In case of different screws being referred
to in the illustration, the letter Tr is followed by a number and a small letter
, for instance: (Tr4a).
Unless otherwise specified, units and components are reassembled by pro-
ceeding in the reverse order of removal.
Chassis