Maximum Static Pressure For Pump Heads; Flow Control Specifications - Levitronix PuraLev iF100SU User Manual

2.5 Maximum Static Pressure for Pump Heads

77
6
5
4
3
[bar]
2
1
Max. Static Pressure for DCP-200
0
25 30
Figure 9: Specification for maximum static pressure of pump head
Note 1: Pressure limits only valid for pump head mounted on motor and do not account for tubing limits attached to the fittings.
Note 2: The above chart is also applicable to the DCP-200.3-SF1-G25 with sterile fittings.

2.6 Flow Control Specifications

Flow Controller Type
Characteristics
Flow Range [lpm]
Accuracy of Reading
(at 20°C fluid temperature)
Note: Repeatability < Accuracy/2
Step from 10 – 90% of full scale.
Response Time:
Fluid Temperature / Ambient Temperature
Table 6: Specifications of flow controller systems
PL-4079-00, Rev00, DCO# 21-271
[°F]
87 97
Safety Factor = 1.3 (according to EN12162)
Limitation: Given by deformation. Burst pressure is significantly higher
Ambient Temp = 25 C
Note: Pressure limit only valid for pumphead mounted on motor. Values
only valid after Gamma radiation doses of < 40 kGy.
35 40
Liquid Temperature in [°C]
®
PuraLev iF100SU
with LFS-06SU
0 – 8
> 1.7 l/min: ±1%
< 1.7 l/min: ±17 ml/min
1
< 1s
Normal range: 10 – 60 °C ( 50 – 140 °F )
Note 1: Values for flow control parameters, which are optimized to the specific hydraulic circuit.
Default parameters are tuned for general flow control stability and may have higher values.
User Manual for PuraLev
107 117
45 50
®
PuraLev iF100SU PuraLev
with LFS-06SU-SC1 with LFS-10SU
0 – 8 0 – 20
> 0.075 l/min: ±1%
> 4.7 l/min: ±1%
< 0.075 l/min: ±0.75 ml/min
< 4.7 l/min: ±47 ml/min
1
< 1s
< 1s
0 – 40
/
®
www.levitronix.com
127 137
80
70
60
50
[psi]
40
30
20
10
0
55 60
® ®
iF100SU PuraLev iF100SU
with LFS-10SU-SC1
0 – 20
> 0.75 l/min: ±1%
< 0.75 l/min: ±7.5 ml/min
1
1
< 1s
0 C (32 – 104 0
F)
iF100SU
9