Table of Contents
Advertisement
8
TECHNICAL SAFETY
•
Installation of this appliance must be
performed only by a licensed specialist The
installer is responsible for connecting the
appliance to the mains power supply in
observance
recommendations.
•
Check the appliance for visible signs of
damage before using it. If the appliance
has been damaged in transport, do not
connect
it.
appliance! It could be dangerous!
•
Repairs should be performed by a licensed
technician only. Improper repair may result
in considerable danger to you and others. If
your appliance needs repair, contact a
Service Centre or your dealer.
•
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
•
Electrical leads and cables must not be
touching the appliance.
•
The appliance should be connected to the
mains power supply by means of an
approved circuit breaker or fuse. Never use
multiple plug adapters or extension leads to
connect appliance to the mains electricity
supply.
•
The power supply of the appliance should
be turned off before repair or clean.
•
This appliance must not be used in a non-
stationary location (for example on a ship).
Attention!
To avoid the possibility of electric
shock, the appliance should be powered
down before replacing the
EN
of
the
relevant
Never
use
a
damaged
lamp.
safety
Advertisement
Table of Contents
