Table of Contents
Advertisement
16
INSTALLATION OF THE OVEN
The oven can be installed under a work top or in a
cooking column. Figure shows the installation
dimensions. Make sure that surrounding materials
are heat resistant. Align the oven centrally with
respect to the side walls of the units surrounding it
and fix it in place with the screws and Allen screws
provided.
See the accompanying instructions for combining
the oven with multi-functional gas or gas-electric
cookers.
PREPARATION
Clean the oven thoroughly with soapy water and
rinse well. To remove the lateral frames from
smooth-walled ovens, proceed as shown in the
figure.
Operate the oven for about 5 minutes at maximum
temperature to burn off all traces of grease which
might otherwise create unpleasant smells when
cooking.
Important!!!
As a safety precaution, before cleaning the oven,
always disconnect the plug from the power socket
or the power cable from the oven. Do not use acid
or alkaline substances to clean the oven (lemon
juice, vinegar, salt, tomatoes etc.). Do not use
chlorine based products, acids or abrasive
products to clean the painted surfaces of the oven.
•
Fit the turntable support 1 in the centre of
the oven deepening 2.
•
Put the turntable ring 3 from above the
support 1.
•
Put the turntable plate 4 on the top of the
ring.
Whenever you use the microwave, the turntable
plate and the corresponding accessories must be
inside and correctly fitted together.
EN
Advertisement
Table of Contents
