Troubles And Troubleshooting; Disposing Of The Battery - BRAYER BR4260 Instruction Manual

• Install the right part of the round brush (21) back to
its place, press on the clamp (20) to fix the round
brush (21) (pic. 7).
• Make sure that the round brush (21) is fixed properly.
Cleaning the vacuum cleaner body
• Wipe the vacuum cleaner body with a soft, slightly
damp cloth and then wipe it dry.
• Never immerse the vacuum cleaner body, the electric
brush (15) and the power adapter (22) into water or
other liquids. Make sure that no liquid gets inside the
vacuum cleaner body and the electric brush (15).
• Do not use solvents or abrasives for cleaning the
vacuum cleaner body and the removable parts.
STORAGE
• Before taking the vacuum cleaner away for storage,
clean the vacuum cleaner body, the dust bin and the
electric brush (15).
• If you are not going to use the vacuum cleaner for a
long time, it is recommended to remove the battery
(10). To do this, press on the clamp (9) and remove
the battery (10).
• Keep the vacuum cleaner in a dry cool place out of
reach of children and disabled persons.

DISPOSING OF THE BATTERY

• Remove the battery (10), to do this, press on the
clamp (9) and remove the battery (10). Do not
discard the battery (10) with usual household waste;
apply to the specialized center for further recycling.

Troubles and troubleshooting

Problem Reasons
The vacuum cleaner The battery is fully
cannot be switched on. discharged.
The suction power The dust bin is full.
decreased.
The filter block is dirty.
The extension pipe
became obstructed.
The round brush in
the electric brush
does not rotate.
The battery is almost
discharged.
The indicators don't No voltage in the
light up during the socket.
battery charging.
The power adapter is
disconnected from the
mains.
The contact fault
between the power
adapter cord plug
and the socket on the
vacuum cleaner body
occurred.
Short operation time of The battery is not fully
the vacuum cleaner. charged.
Natural aging process
of the battery.
EN 11
Solution
Charge the battery.
Clean the dust bin.
Clean the filter block.
Remove the
obstruction from the
extension pipe.
Clean the electric
brush.
Fully charge the
battery.
Check the mains
socket by plugging a
known good appliance
to it.
Plug the power
adapter into the mains
socket.
Check the connection
between the power
adapter cord plug
and the socket on the
vacuum cleaner body.
Fully charge the
battery.
The rechargeable
battery is a
consumable material.
After the warranty
period expires, the
consumer should buy
a new battery.