Disposing Of The Battery; Troubles And Troubleshooting; Delivery Set - BRAYER BR4263 Instruction Manual

STORAGE
• Before taking the vacuum cleaner away for storage,
clean the vacuum cleaner body, the dust bin and the
electric brush (2).
• Keep the vacuum cleaner in a dry cool place out of
reach of children and disabled persons.

DISPOSING OF THE BATTERY

• Remove the battery (11), to do this, set the clamp
(14) to the position « », press and hold the clamp
(13). Do not discard the battery with usual household
waste; apply to the specialized center for further
recycling.

Troubles and troubleshooting

Problem Reasons
The vacuum cleaner The battery is fully
cannot be switched on. discharged.
The suction power The dust bin is full.
decreased.
The HEPA-filter
is dirty.
The extension pipe
became obstructed.
The round brush in
the electric brush
does not rotate.
The battery is almost
discharged.
The indicators don't
light up during the
battery charging.
Short operation time of
the vacuum cleaner.
Solution
Charge the battery.

DELIVERY SET

1. Vacuum cleaner (with the dust bin) – 1 pc.
Clean the dust bin.
2. Wall-mounted holder - 1 pc.
Clean the HEPA-filter.
3. Extension pipe – 1 pc.
Remove the
4. Electric brush – 1 pc.
obstruction from the
5. Crevice nozzle – 1pc.
extension pipe.
6. Power adapter – 1 pc.
Clean the electric
brush.
7. Manual – 1 pc.
Fully charge the
battery.
No voltage in the Check the mains
socket. socket by plugging a
known good appliance
The power adapter is
to it.
disconnected from the
mains. Plug the power
adapter into the mains
The contact fault
socket.
between the power
adapter cord plug Check the connection
and the socket on the between the power
vacuum cleaner body adapter cord plug
occurred. and the socket on the
vacuum cleaner body.
The battery is not fully Fully charge the
charged. battery.
Natural aging process The rechargeable
of the battery. battery is a
consumable material.
After the warranty
period expires, the
consumer should buy
a new battery.
EN 11