EMOJO Caddy Assembly Instructions Manual page 8

Your CADDY trike includes a LED headlamp. To install the lamp use the same long 2" screw you used to
aWach the L-shaped bracket to the front fork.
1-Pass the 2" screw thru the headlamp bracket
2-Connect the wires from the trike to the lamp, the wire with the text on it is the + (posi/ve), the wire
with no text is the – (nega/ve)
3-To turn on the headlight, first turn on your display by pressing the M buWon, then press and hold the
UP arrow for a few seconds.
Pass the front fender 2" screw thru
HEADLAMP
This loop on the lamp bracket
Posi/ve wire
Posi/ve wire input on the headlamp rear.